Fire Hydrants

Fire HYDRANT

Dry Pillar Hydrant (4”,6”)

FIREKING Fire Hydrant is the simplest version of the Pillar Hydrant, for 100mm and 150mm diameter size. It is suitable for locations or areas where damage may be caused by impact or frost.

Guided breaking system; this model also incorporates a device similar to a hydrant lower shell would be free and remain closed automatically is guaranteed with no need of extra components.

Its design and dimensions permit easy maintenance and repair of hydrant.

Technical Details:

-Maximum working pressure 225 psi (16 bar)

-Factory tested hydrostatically to 350 psi (25 bar)

-Hydrant connection according to BS:336

-All interior operating parts are made of highly corrosive resistant alloy, each having strength and good wearing resistance.

Outlets Discharge Simultaneously	Minimum K-Factor (Metric)
1 outlets of 2 ½” (70mm)	1300
2 outlets of 2 ½” (70mm)	2500

Wet Pillar Fire Hydrant

High Pressure Fire Hydrant

MODEL NO.	OUTLET	INLET
FKHWPH100	2×2 ½ Pressure Regulation Control Valve with Female BS Instantaneous Outlet	4”Table E BS 10 Flange
FKHPH150	4×2 ½ Pressure Regulation Control Valve with Female BS Instantaneous Outlet	6”Table E BS 10 Flange

-Body material : Cast Iron to BS 1452 Model HYDO56-CS-RD-Carbon Steel

-Test Pressure : 400 psi

-Working Pressure : 300 psi

-Outlet pressure setting : 7 bar at static flow

-Finishing : Red

2 Way Fire Hydrant

MODEL NO.	OUTLET	INLET
FKHWPH100	2×2 ½ Male Thread	4”Table E BS 10 Flange
FKHPH100B	2×2 ½ Control Valve with Female BS Instantaneous Outlet	6”Table E BS 10 Flange

-Body material : Cast Iron to BS 1452

-Outlet : Copper alloy BS 1400

-Test Pressure : 400 psi

-Working Pressure : 300 psi

-Finishing : Red & Yellow